Preface Thank you for purchasing our product. Please read this manual to be familiar with the product. Note: this manual provides relevant informat
Select the key or lamp on the panel, and the information of the equipment under control in the function list will be filtered in a
After the key function is configured, click the "Link" in the "Panel Function List", and the corresponding indica
2.5.3 MIC configuration MIC can only be configured by the corresponding MIC switch: After associating itself with the correspondi
Note: for PS type panel or MIX type panel, first of all, associate the panel itself and the matrix, select the key, select the micr
Ⅲ、MIX configuration examples Open the panel PC software, and click the "Search Devices", to search the equip
Expand the sub-options of the matrix in the function list, i.e. function options of the key control. Double click the sub-opti
Set the completion key and LED, and the functions in default 1 are as follows: Then configure the knob, and select the correspondi
Then configure the corresponding indicator lamp of the knob, select the corresponding indicator lamp, and configure the electrical level of output ch
configuration" in the tool bar, to upload the equipment configuration. The configuration uploaded is "defaul
Set Panel 2 (172.16.83.164) as the current configuration panel, and associate Panel 1. Call default 1 through KEY-1 and Call default 2 through KE
Table of Content Preface ...
IV、Frequently Asked Questions * What configurations shall be made when the system is used for the first time? Answer: When this sys
Ⅰ、Equipment architecture 1.1 Brief introduction of equipment TP4 VOL PS MIX MEX Control protocol Standard TCP/IP PoE network power supply equipmen
Ⅱ、software operation Software installation: the software supports and operating systems of XP, win7 and vista. Before software ins
Equipment installationConfigurate IP of PCLogin control softwareSeach equipment Set the panel as currentModify Panel network informationDown load pan
2.1 Menu bar and tool bar (1) Open: To load the equipment configuration saved locally on the currently selected panel. The
Selected the panel to be configured in the "Target list", click the "Set Current", and the "Current"
2.3 Function list Select the panel in the "Target List" and "Set Current", and then select the equipment un
2.4 Preset Information Each panel can be set to "add" multiple defaults; To select the default, modify the default name in the edit
Commentaires sur ces manuels